Lanier AP4510 Setup Manual page 314

Appendix
Direct Printing Port
The direct printing port allows printing directly from a computer, connected to
the network, to the printer.
Use the diprint command to change the direct printing port settings.
❖ ❖ ❖ ❖ View settings
Ther following command displays the current direct printing port settings.
msh> diprint
Example output:
port 9100
timeout=300(sec)
bidirect off
• The "Port" specifies the port number of the direct printing port.
• The "bidirect" setting indicates whether the direct printing port is bidirec-
tional.
❖ ❖ ❖ ❖ Bidirectional configuration for the direct printing port
Use this setting to configure whether the direct printing port is bidirectional.
6
The factory default is "off".
msh> diprint bidirect {on|off}
Note
❒ If you select "on", SmartNetMonitor for Client or Standard TCP/IP on
Windows 2000 might not work correctly.
SMB
Use the smb command to configure or delete the computer name or workgroup
name for NetBEUI.
msh> smb parameter
Parameter
comp
group
comment
clear comp
clear group
clear comment
74
Settings
Your computer name consisting of up to 13 characters
Workgroup name consisting of up to 15 characters
Comment consisting of up to 31 characters
Clears the computer name
Clears the Workgroup name
Clears comment