Lanier AP4510 Setup Manual page 136

Troubleshooting
Messages/Second messages
Load Paper
Tray #
/Paper Size
Paper Type
Memory Overflow
Menu Protected
Cannot Change
No Files Exist
Output Tray Changed
5
Paper Invalid
for Duplex:Bypass
/Change Setting
or Form Feed
Paper Invalid
for Duplex:LCT
/Change Setting
or Form Feed
62
Description
There is no paper left in this
tray.
#: tray number
The printer identified a PS3
work area overflow error.
The menu is protected and the
settings cannot be changed.
There are no files available for
the Sample Print job or the
Locked Print job.
The output tray has been
changed. The tray in the paper
feed path is not set correctly
when the printer receives the
print job.
The paper selected cannot be
used for duplex printing.
The paper selected cannot be
used for duplex printing.
Solution
Load paper into the tray indi-
cated.
Increase the memory capacity
or decrease the file size to be
downloaded.
Wait for two seconds until the
previous display appears.
Wait for two seconds until the
previous display appears.
Select the output tray correct-
ly.
Select the tray or load appro-
priate paper so that duplex
printing can be performed.
There are two methods to
resume printing.
A
Use the control panel to set
the correct paper size and
direction of the paper in
tray.
Press { { { { Form Feed} } } } and se-
B
lect the tray with the con-
trol panel.
When { { { { Form Feed} } } } cannot be
performed, change the paper
setting.
Select the tray or load appro-
priate paper so that duplex
printing can be performed.
There are two methods to
resume printing.
A
Use the control panel to set
the correct paper size and
direction of the paper in
tray.
Press { { { { Form Feed} } } } and se-
B
lect the tray with the con-
trol panel.
When { { { { Form Feed} } } } cannot be
performed, change the paper
setting.