Lanier AP4510 Setup Manual page 288

NetWare Configuration
J J J J
On the [NIB] menu, click [Exit] to exit the NIB Setup Tool.
K K K K
Type "PCONSOLE" from the command prompt.
F:> PCONSOLE
L L L L
Create a print queue as follows:
Note
❒ If you use a currently defined print queue, go to step
A A A A From the [Available Options] menu, select [Print Queue Information], and then
press the { { { { ENTER} } } } key.
B B B B Press the { { { { INSERT} } } } key, and then type a print queue name.
C C C C Press the { { { { ESC} } } } key to return to the [Available Options] menu.
4
M M M M
Create a printer as follows.
A A A A From the [Available Options] menu, select [Print Server Information] , and then
press the { { { { ENTER} } } } key.
B B B B To create a new print server, press the { { { { INSERT} } } } key, and then type a
print server name.
If you use a currently defined print server, select one of the print servers
shown in the [Print Server] list.
Important
❒ Use the same name as that specified in the NIB Setup Tool. (Step H).
C C C C From the [Print Server Information] menu, select [Print Server Configuration].
D D D D From the [Print Server Configuration] menu, select [Printer Configuration].
E E E E Select the printer which is indicated as "Not Installed".
Important
❒ Use the same number as that specified as Remote Printer No. using the
NIB Setup Tool. (Step I-D).
F F F F Type a new name, if you change the name of the printer.
A name "Printer x" is assigned to the printer. x stands for the number of
the selected printer.
G G G G Select [Remote Parallel, LPT1] for type.
The IRQ, Buffer size, Starting form, and Queue service mode are automat-
ically configured.
H H H H Press the { { { { ESC} } } } key, and then click [Yes] in the confirmation dialog box.
I I I I Press the { { { { ESC} } } } key to return to [Print Server Configuration Menu].
48
M
.