Lanier AP4510 Setup Manual page 192

Making Printer Settings with the Control Panel
Menu
Output Tray
Job Separation
Energy Saver
6
Memory Usage
Unit Of Measure
118
You can select the default output tray.
Standard Tray, Finisher Shift Tray, Finisher Proof Tray, Mailbox
Proof Tray, Mailbox Tray 1-9
Note
❒ Default: Standard Tray
❒ Only the installed trays appear on the panel display.
You can enable Job Separation.
• On
• Off
Note
❒ Default: Off
❒ This menu appears only when the optional Finisher is in-
stalled.
You can set how many minutes the printer waits before switching
to Energy Saver mode. Energy Saver mode reduces electric power
consumption.
On, Off
1 minute, 5 minutes, 15 minutes, 30 minutes, 45 minutes, 60 min-
utes,
Note
❒ Default: On
❒ Default: 1 minute
❒ If there is an error in the printer, the printer will not turn into
Energy Saver mode.
❒ When the printer switches to Energy Saver mode, the Power
indicator turns off, while the On Line indicator stays on.
You can select the volume of memory to be used from "Font Pri-
ority" or "Frame Priority", according to the paper size, resolution
or printer language.
• Font Priority
This setting uses memory for registering fonts.
• Frame Priority
This setting uses memory for high speed printing.
Note
❒ Default: Frame Priority
Reference
For more information, see p.136 "Paper Size and Resolution".
You can select "mm" or "inch" for the custom paper size.
Description