Lanier AP4510 Setup Manual page 112

Paper and Other Media
H H H H
While lifting the left side of the
paper, attach the rear guide.
3
Note
❒ The rear guide is not necessary
when 11 × 17 inch paper is load-
ed in the tray. Put it in the hold-
er in the tray.
I I I I
Adjust the paper size dial to
match the size and feed direction
of the paper in the paper tray.
Important
❒ A4, B5 and letter size paper can
be loaded K and L. Be sure to
set the dial to the correct direc-
tion to avoid paper misfeeds.
❒ If you want to use a paper size
and feed direction that are not
indicated on the paper size dial,
set the dial to "p". In this case,
you should specify the paper
size using the control panel. ⇒
p.99 "Making Printer Settings
with the Control Panel"
38
J J J J
Slide the tray into the printer gen-
tly until it stops.
TAPY092E
Note
❒ If the printer is in the Energy
Saver mode when changing the
paper size, Press { { { { Enter #} } } } be-
fore printing. This will update
the size setting.
TAPY090E