Lanier AP4510 Setup Manual page 179

Menu
Paper type
Tray Locking
Tray Priority
If you use different kinds of paper, you set the paper type for Tray
1, Tray 2, Tray 3, Tray 4, Large Capacity Tray or Bypass Tray.
❖ ❖ ❖ ❖ Tray 1, Tray 2, Tray 3, Tray 4, LCT
Plain Paper, Recycled Paper, Special Paper, Color Paper, Let-
terhead, Preprinted, Prepunched, Bond paper, Cardstock
❖ ❖ ❖ ❖ Bypass Tray
Plain Paper, Recycled Paper, Special Paper, Color Paper, Let-
terhead, Preprinted, Prepunched, Labels, Bond paper, Card-
stock, Transparency, Thick Paper
Note
❒ Default : Plain Paper
❒ Only the installed trays appear on the panel display.
If you use different kinds of paper, you can lock a tray to prevent
printing on wrong paper such as letterhead or colored paper.
When "Auto Select" is selected in the Paper Source selections from
the printer driver, the locked tray will not be used.
Tray 1, Tray 2, Tray 3, Tray 4, LCT, Bypass Tray
Note
❒ Only the installed trays appear on the panel display.
❒ You cannot lock multiple trays.
❒ If you want to use the locked tray, you must select the tray
from the printer driver.
❒ When a locked tray is selected from the printer driver, the
printer does not search for another tray.
You can set which tray should be checked first when "Auto Tray
Select" is selected in the Paper Source selections from the printer
driver. When printing from DOS, the tray selected here is used
when no tray is selected for a print job.
Tray 1, Tray 2, Tray 3, Tray 4, LCT
Note
❒ Default : Tray 1
❒ Only the installed trays appear on the panel display.
❒ It is recommended that you load paper of the size and direc-
tion you most frequently use in the tray selected with "Tray
Priority".
Description
Paper Input Menu
6
105