Using A Lun Of A Non-Boot Disk; Using Other Disks - Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual

 Creating partitions of the built-in disk
Create disk partitions in the built-in disk, and create a swap file system and other necessary files.
Remarks
Fujitsu recommends you to place the swap partition in the built-in hard disk. For details, contact
your sales representative or a field engineer.

5.2.5 Using a LUN of a non-boot disk

To use a LUN of a non-boot disk such as a data disk, you need to change settings on the ETERNUS side after
operating system installation.
For details on the settings required on the ETERNUS when connecting to it, see the ETERNUS manuals at the
following website:
http://www.fujitsu.com/global/services/computing/storage/eternus/documentation/

5.2.6 Using other disks

To use the system while USB memory or another device recognized as a hard disk is mounted, the disk must be
configured as a non-bootable device. Devices that are recognized as hard disks are added to the [Change
Legacy HDD Boot Priority] menu. For details on how to make a hard disk non-bootable, see 5.2 Using the
Built-in Disk with RHEL.
142