Installing Hbanyware - Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual


KB940467
Detailed information about this hot fix is available at the following Microsoft webpage:
http://support.microsoft.com/kb/940467/
If you have a SupportDesk Service agreement, contact SupportDesk for inquiries. Otherwise, acquire
information from Microsoft.
Note
For a SAN boot configuration, be sure to apply the above hot fix.

4.2.4 Installing HBAnyware

Confirm the utility (HBAnyware).
Remarks
Depending on the driver version, read "HBAnyware" as "OneCommand Manager."
Install HBAnyware if the following applies:

The FC card is installed,
and

HBAnyware has not been installed.
The installation of HBAnyware can be confirmed by the existence of [Emulex] - [HBAnyware], which is
displayed by selecting [All Programs] from the [Start] menu.
1. Download the driver and utility of the Fibre Channel card from the following URL:
http://primeserver.fujitsu.com/primequest/download-e/
Note
The downloaded binary file has a description about the PRIMERGY, but the driver and utility can be used
for the PRIMEQUEST 1000 series.
121