Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual page 161

3. The following screen appears. Use the [+] key and [-] key to move FC to the top. Press the [Enter]
key.
FIGURE 5.12
4. Press the [Enter] key to return to the previous screen ( Figure 5.12 [Change Legacy HDD Boot
Priority] screen (for changing the order of HDDs) ). Select [Commit Change and Exit]. Press the
[Enter] key.
Press the [Esc] key to return to FIGURE 5.5 [Boot Manager front page] screen.
This completes the setting of the boot order.
 Configuring an SAS disk as a non-boot device
1. Open [Change the order] from the [Change Legacy HDD Boot Priority] menu.
2. Place the cursor on the SAS disk, and press the [Space] key.
3. The SAS disk becomes a non-boot device, indicated by two slashes ("//") added to the beginning of
the SAS disk name.
If there are multiple SAS disks, repeat the above setting for every SAS disk.
4. Press the [Enter] key to return to the previous screen.
[Change Legacy HDD Boot Priority] screen (for changing the order of
HDDs)
140