Settings For Vmware Esx - Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual

1.4.3 Settings for VMware ESX

Make settings for a connection with the VMware ESX main unit by referring to the following tables:

TABLE 1.8

TABLE 1.9

TABLE 1.10

TABLE 1.11
The setting values depend on the ETERNUS disk array model used and the ESX version.
TABLE 1.8 Inquiry Standard Data Version (for VMware ESX)
Operating system
VMware vSphere (ESX4.1,
ESX4.0 / ESXi4.1, ESXi4.0)
VMware vSphere
(ESXi5.1, ESXi5.0)
TABLE 1.9 Sense code conversion pattern (for VMware ESX)
Operating system
VMware vSphere (ESX4.1,
ESX4.0 / ESXi4.1, ESXi4.0)
VMware vSphere
(ESXi5.1, ESXi5.0)
Inquiry Standard Data Version (for VMware ESX)
Sense code conversion pattern (for VMware ESX)
Host specific mode (for VMware ESX)
Asymmetric/Symmetric Logical Unit Access (for VMware ESX)
ETERNUS 4000 model 300/500
ETERNUS 8000 model
700/900/1100/2100
Version 05 (Default)
-
ETERNUS 4000 model 300/500
ETERNUS 8000 model
700/900/1100/2100
Linux (Linux GR multipath driver not used) recommended
-
10
Setting item
Inquiry Standard Data Version
ETERNUS 4000 model 400/600
ETERNUS 8000 model
800/1200/2200
Version 05 (Default)
Setting item
Sense code conversion pattern
ETERNUS 4000 model 400/600
ETERNUS 8000 model
800/1200/2200
Linux (Linux GR multipath driver
not used)
recommended