Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual page 167
San boot environment configuration manual
Hide thumbs
Also See for PRIMEQUEST 1000 Series:
- User manual (905 pages) ,
- Tool reference (578 pages) ,
- Installation manual (344 pages)
Table of Contents
Advertisement
Remarks
Use the following procedure to confirm a multipath configuration.
1.
Set the HBA UEFI driver. For details, see CHAPTER 2 Settings on the Fiber Channel Card (FC
Card).
2.
Start at the Boot Manager Front Page. Display the following screens in the order given: [Boot
Maintenance Manager] - [Boot Options] - [Change Legacy HDD Boot Priority].
3.
Confirm that multiple disks with multiple HBAs are recognized, as shown in the following figure.
If the multiple disks are not recognized, reconfirm that there is no problem in how the multipath
connections were restored.
FIGURE 6.2
[Change Legacy HDD Boot Priority] screen (confirming a multipath
configuration)
4.
After confirming that the multiple disks are recognized, start the operating system.
146
Advertisement
Table of Contents
