Eternus Connection Settings; Settings For Windows - Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual

1.4

ETERNUS Connection Settings

For details on the settings required on the ETERNUS when connecting to it, see the ETERNUS manuals at the
following website:
http://www.fujitsu.com/global/services/computing/storage/eternus/documentation/

1.4.1 Settings for Windows

This section describes settings for Windows for a connection to the ETERNUS.
TABLE 1.1 Reservation Conflict responses to Test Unit Ready (for Windows)
Operating system
Windows Server 2003
SP2,
Windows Server 2003 R2
SP2
Windows Server 2008
SP2,
Windows Server 2008
R2, R2 SP1 ,
Windows Server 2012
Set the Vendor Unique sense code of the host response for the ETERNUS4000/ETERNUS8000 series by referring to
TABLE 1.2. Vendor Unique sense codes (for Windows). However, the Vendor Unique sense code is suppressed by
default for the ETERNUS DX series and the ETERNUS DX S2 series (current product), so no setting is needed for it.
MSCS or WSFC SafeCLUSTER
used used
Normal
Conflict response response
(Default)
Normal response
-
(Default)
6
Condition
VERITAS Cluster
Server used
Normal response
(Default)
Other
Normal
response
(Default)