Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual page 128

FIGURE 3.35
[Adapter Selection] menu
Remarks
If you are updating converged network adapter firmware (e.g., Boot BIOS), check the WWN after the firmware
update.
To clearly identify the mounting location of the converged network adapter, record the host name (the one that
identifies the PRIMEQUEST 1000 series server), mounted card, mounting slot location, BUS number, and
DEV number.
For the BUS number and slot number, check the BUS number and slot number of the target HBA from the
[IOB] menu and [PCI_Box] menu of the MMB Web-UI. The BUS number appears as the middle number of the
three numbers delimited by a slash in the [Seg/Bus/Dev] item.
The following example shows how the WWNs are recorded.
107