Installing The Os And Bundled Software - Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual
San boot environment configuration manual
Hide thumbs
Also See for PRIMEQUEST 1000 Series:
- User manual (905 pages) ,
- Tool reference (578 pages) ,
- Installation manual (344 pages)
Table of Contents
Advertisement
4.1.2 Installing the OS and bundled software
Use SVIM to install the OS and bundled software.
1. Make the setting for booting the partition from a remote storage device.
Remarks
If the operating system supports UEFI mode, you can install it in UEFI mode by using the following
procedure to change the boot order.
1.
After powering on the partition, press any key ([Space] key, for example) other than the [Enter] key
while the FUJITSU logo is displayed, to display the Boot Manager Front Page.
2.
Select the following items from the menu in the following order, on the Boot Manager Front Page:
[Boot Maintenance Manager] - [Boot Options] - [Change Boot Order] - [Change the order]
3.
Specify [UEFI:DVD/CD 0] as the highest-priority device to boot from remote storage.
FIGURE 4.6
The following table describes the meaning of the menu.
[Change Boot Order] menu
113
Advertisement
Table of Contents
