Hard Disk Drive Error Messages At System Boot - Fujitsu PRIMERGY TX2560 M2 Operating Manual

8.9 Hard disk drive error messages at system
boot
Various hard disk drive error messages may occur when the system is
rebooted. These error messages are caused by modifications in the selected
RAID configuration.
RAID controller configuration incorrect
Ê Check and correct the settings for the drives using the RAID controller
configuration program.
I
Further information is provided in the "Integrated RAID for SAS User's
Guide" (on the Fujitsu manuals server under x86 Servers - Expansion Cards
- Storage Adapters - LSI RAID / SCSI Controllers) or in the "Modular RAID
Controller Installation Guide" (on the Fujitsu manuals server under
x86 Servers - Expansion Cards - Storage Adapters - LSI RAID / SCSI
Controllers).
For more information on configuring the controller, see section
"Configuring the server" on page
TX2560 M2 / RX2560 M2
75.
Operating Manual
Troubleshooting and tips
87