Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual page 178

6.2.5 Using a LUN of a non-boot disk
To use a LUN of a non-boot disk such as a data disk, you need to change settings on the ETERNUS side
after operating system installation.
For details on the settings required on the ETERNUS when connecting to it, see the ETERNUS manuals
at the following website:
http://www.fujitsu.com/global/services/computing/storage/eternus/documentation/
6.2.6 Using other disks
To use the system while USB memory or another device recognized as a hard disk is mounted, the disk
must be configured as a non-bootable device. Devices that are recognized as hard disks are added to the
[Change Legacy HDD Boot Priority] menu. For details on how to make a hard disk non-bootable, see 6.2
Using the Built-in Disk with SLES11 SP2.
157