Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual page 29

To use the ETERNUS multipath driver or GR multipath driver for a multipath connection, or to use the
ETERNUS device driver or GR device driver for a single-path connection, set the sense code conversion
pattern of the host response to "Do not convert."
If the ETERNUS multipath driver, GR multipath driver, ETERNUS device driver, and GR device driver are not
used, set the sense code conversion pattern of the host response to "Windows (GR/ETERNUS multipath drivers
and device drivers not used) recommended."
TABLE 1.3 Sense code conversion patterns (for Windows)
GR/ETERNUS multipath driver
Operating
system
Windows
Server 2003
SP2,
Windows
Server 2003
R2 SP2
Windows
Server 2008
Do not convert
SP2,
(Default)
Windows
Server 2008
R2,
Windows
Server 2008
R2 SP1
Windows
Server 2012
For a Windows server that has VMware VCB Proxy installed and operates while sharing LUNs with VMware
ESX, make settings by referring to 1.4.3 Settings for VMware ESX.
Used Not used
Windows
(GR/ETERNUS
multipath drivers
and device drivers
not used)
recommended
8
Standard multipath driver
for Windows Server 2008
(msdsm)
-
Windows
(GR/ETERNUS
multipath drivers and
device drivers not used)
recommended
VERITAS
Storage
Foundation for
Windows
Windows
(GR/ETERNUS
multipath drivers
and device
drivers not used)
recommended