Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual page 33

TABLE 1.13 Host specific mode (for VMware ESX)
VMware vSphere (ESX 4.1,
ESX 4.0)
For the PRIMEQUEST 1000 series server connected in a SAN boot configuration, make settings by referring to
TABLE 1.15 Sense code conversion pattern (for VMware ESX (PRIMEQUEST 1000 series server
connection)).
TABLE 1.14 Sense code conversion pattern (for VMware ESX)
Server model to be connected
PRIMEQUEST 1000 series
Note
If this setting does not match the setting in the respective operating system, give priority to this setting.
Operating system
Windows Server 2008 SP2 running
as VCB Proxy server
Windows Server 2003 SP2 running
as VCB Proxy server
Used
Linux (Linux GR multipath driver not
used) recommended
12
Setting item
Host specific mode
VMware Mode
Normal Mode (Default)
SAN boot configuration
Conforms to setting in each
environment
Not used