Speed And Topology Settings - Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual

2.3.7 Speed and Topology settings

The following describes how to make the Speed and Topology settings.
Note
Do not set [AUTO Loop First - default.] or [AUTO Point to Point first.]. First, make the fixed setting.
Otherwise, the connected device will not be normally recognized.
 Static Topology setting
On the [Emulex Adapter Configuration Main Menu] screen, make the following setting that corresponds to the
connection pattern (Fabric connection/FCAL connection).
1. Select [Configure HBA and Boot Parameters], and then press the [Enter] key.
FIGURE 2.54 Static Topology setting (1)
58