Ethernet Driver; E-Mail Prt Set; Init.n/W Set - Canon Color imageRUNNER LBP5975 User Manual

■ ETHERNET DRIVER

■ E-MAIL PRT SET

5

■ INIT.N/W SET.

5-64 SETUP Menu Settings
AUTO DETECT .................... ON*, OFF
1
COMM.MODE* ................... HALF DUPLEX*, FULL DUPLEX
1
ETHERNET TYPE* ............. 10 BASE-T*, 100 BASE-TX
MAC ADDRESS ................... (Display only)
*1 COMM.MODE and ETHERNET TYPE are displayed only when AUTO DETECT is set to OFF.
Configures the Ethernet driver.
NOTE
For more details on configuring the Ethernet driver, see "Chapter 2 Common
•
Network Settings" in Network Guide.
This item is displayed only when NETWORK in the I/F CONNECTION options is
•
set to ON.
POP3 INTERVAL ................. 0 to 90 MINUTES; 0 MINUTES*
POP3 RECEIVE................... OFF*, ON
SMTP RECEIVE .................. OFF*, ON
Specifies the settings for e-mail print.
NOTE
For more details on e-mail print, see "Chapter 3 Using the Printer on a TCP/IP
•
Network (Windows/UNIX)" in Network Guide.
This item is displayed only when all the following conditions are fulfilled.
•
- NETWORK in the I/F CONNECTION options is set to ON.
- An optional hard disk is installed, and HARD DISK is set to ON.
-
By the initialization in this item, you can reset the network settings to the default
settings.
The network settings can be initialized using the following procedure.
1.
Press [Settings].
2.
Select INTERFACE MENU using [
3.
Select NETWORK MENU using [
4.
Select INIT.N/W SET. using [
5.
<OK?> is displayed. The initialization starts by pressing [OK].
* If you press [Online] without pressing [OK], the printer does not initialize the settings but becomes
ready to print.
NOTE
This item is displayed only when NETWORK in the I/F CONNECTION options is
set to ON.
] and [ ], then press [OK].
] and [ ], then press [OK].
] and [ ], then press [OK].