IMPORTANT
If the developer is not distributed evenly, this may result in deterioration in print
quality. Be sure to carry out this procedure properly.
5
Place paper on a flat surface, place the drum cartridge on it,
and then fold back the tab (A) of the sealing tape as shown in
the figure.
IMPORTANT
When placing the drum cartridge, be sure to place paper under the drum cartridge
•
to prevent a desk or others from being damaged by the bottom of the drum
cartridge.
When pulling the sealing tape out, do not hold the area near the mouth of the
•
sealing tape with your hand. If the tape is severed, it may become difficult to pull
out completely.
(A)
Do not hold this part
with your hand.
Replacing Drum Cartridges
6
6-31