Canon Color imageRUNNER LBP5975 User Manual page 489

Black text appears to be blurred.
Cause
Remedy 1 Set PURE BLACK TEXT (See p. 5-98) in the PS options to ON.
Remedy 2 Set OUTPUT PROFILE (See p. 5-97) in the PS options to TR Normal or TR
Remedy 3 Set RGB PURE BLACK (See p. 5-98) in the PS options to ON.
Thin lines and thin text blot.
Cause
Remedy 1 Adjust the colors in the application and print again. (See the instruction manual
7
Remedy 2 Make the lines bold or use a bold font for the text, then print again.
Remedy 3 Set B & W HALFTONES (See p. 5-100) or COLOR HALFTONES (See p. 5-101)
Remedy 4 If you are using Illustrator 8.0 or later for Windows as an application, set the
Remedy 5 Set OUTPUT PROFILE (See p. 5-97) in the PS options to TR Normal or TR
If [Staple & Collate] or [Collate] is specified when data is printed from the PostScript
application, the printed colors are different from the original colors of the data.
Cause
Remedy 1 Set [Finishing] to [Group] in the printer driver.
7-76 When You Cannot Obtain Appropriate Printout Results
When you are using the PS printer driver, black text is printed with the
toner of Cyan (C), Magenta (M), Yellow (Y), and Black (Bk).
Also, you can specify the same setting in the PS printer driver. For more details,
see Help of the PS printer driver.
Photo.
Also, you can specify the same setting in the PS printer driver. For more details,
see Help of the PS printer driver.
When you were using the PS printer driver, certain thin lines and text were
subject to constraint of an internal process.
supplied with your application)
in the PS options to ERR DIFFUSION or RESOLUTION.
Also, you can specify the same setting in the PS printer driver. For more details,
see Help of the PS printer driver.
setting for [Bitmap Print] to off. (See the instruction manual supplied with
Illustrator)
Photo.
Data was printed with [Staple & Collate] or [Collate] specified from the PS
printer driver when an optional hard disk was not installed. (The
RGB-based color model was used via GDI.)
In order to specify the setting for [Finishing], display the [Finishing] sheet.