Canon Color imageRUNNER LBP5975 User Manual page 456

<56 HDD ERROR>
Cause An error has occurred in the hard disk.
Remedy Format the hard disk in HDD MAINTENANCE (See p. 5-72) in the USER MAIN.
options in the SETUP menu. If the same error occurs, you need to replace the
hard disk. Contact your local authorized Canon dealer for servicing.
<57 RIP ONCE ERR.>
Cause 1 The printer cannot continue to print multiple copies using RIP Once
because the hard disk has run out of free space.
Remedy 1 Divide the job into multiple jobs, then print again.
Remedy 2 Set RIP ONCE (See p. 5-27) in the CONTROL MENU options in the SETUP
menu to OFF, and then perform a hard reset. (The functions of RIP Once
become disabled.)
Remedy 3 A copy of the data is printed by pressing [Online].
Cause 2 The number of the copies that the printer can process exceeded when
printing in the [Edit and Preview] mode.
Remedy 1 Print all the print jobs again using the printer driver for this printer.
Remedy 2 Reduce the number of the pages you print at a time and print again with the job
divided into multiple jobs.
<58 JOB MEM.FULL>
Cause There is not sufficient free RAM space to process jobs.
Remedy 1 If you are processing multiple jobs at once, press [Online] to cancel printing,
wait for other jobs complete, and then print again.
Remedy 2 If the job data is too large, divide the job and print again.
<59 JOB RX ERROR>
Cause The printer received any unanalyzable data while it is receiving a job, or it
timed out.
Remedy 1 Press [Online] to cancel printing, then print again.
Remedy 2 A problem may be occurring in the network you are using. Check the status of
the network that you are using.
<Auto Error Skip>
<Auto Error Skip>
<Auto Error Skip>
Message List 7-43
7