Canon Color imageRUNNER LBP5975 User Manual page 453

Remedy 4 If you want to print in the Super Fine mode, perform a soft reset using the
<39 SPL MEM.FULL>
Cause
Remedy 1 The printer continues printing by pressing [Online]. However, the page with
Remedy 2 Perform a soft reset in the RESET menu, specify the paper size smaller, and
Remedy 3 Perform a soft reset in the RESET menu, set GRADATION LEVEL (See p. 5-44)
Remedy 4 If 2-SIDED PRINT. in the FEEDER MENU options in the SETUP menu is set to
7
Remedy 5 Change the setting for HALFTONES (See p. 5-47) in the QUALITY MENU
Remedy 6 Install an optional expansion RAM module, then print again. (See Getting
<41 CHK PAPER SZE>
Cause 1
Remedy
Cause 2
Remedy
7-40 Message List
RESET menu, and then increase the free space of RAM using the following
procedure.
- Perform a hard reset or cycle the power of the printer (Be aware that all the
data in the memory that the printer has received will be deleted).
- Install an optional expansion RAM module. (See Getting Started Guide)
Because spool memory has run out, the printer cannot print.
which an error has occurred is not printed.
then print again.
in the QUALITY MENU options in the SETUP menu to HIGH 1, and then print
again.
ON, specify OFF, and then print again.
options in the SETUP menu, and then print again.
Started Guide)
The size of the paper loaded in the multi-purpose tray or paper cassette is
different from the setting for TRAY PAPER SIZE, CASSETTE2 SIZE,
CASSETTE3 SIZE, or CASSETTE4 SIZE specified from the computer or
control panel.
Match the size specified in TRAY PAPER SIZE (See p. 5-29) and the size of the
loaded paper, and then press [Online].
You are using UFR II Printer Driver, and you loaded custom paper of its
long edges 11.69 in. (297.0 mm) or less and printed when TRAY PAPER
SIZE, CASSETTE2 SIZE, CASSETTE3 SIZE, or CASSETTE4 SIZE in the
FEEDER MENU options in the SETUP menu was set to MIXED SIZE.
Load the paper in landscape orientation, then print again.
<Auto Error Skip>