Canon Color imageRUNNER LBP5975 User Manual page 452

<35 PDF SIZE ERR>
Cause There is not sufficient free space to print the PDF file using the direct print
function.
Remedy Press [Online] to cancel the job. Afterward, perform the following processes
(decreasing the size of the PDF file), and then print again.
- Optimizing the PDF file
- Dividing the PDF file into multiple files
<35 TABLE FULL>
Cause The number of the documents in a job has exceeded 16.
Remedy The printer continues printing by pressing [Online]. However, the job with which
an error has occurred is not printed.
<36 DIS.LIST FULL>
Cause The memory required for processing has run out and overflowed.
Remedy 1 Press [Online] to continue printing. However, the job with which an error has
occurred is not printed.
Remedy 2 Perform a soft reset in the RESET menu, increase the free space of RAM using
the following procedures, and then print again.
- Perform a hard reset or cycle the power of the printer (Be aware that all the
data in the memory that the printer has received will be deleted).
- Install an optional expansion RAM module (256 MB or more*). (See Getting
Started Guide)
* However, even if a 512-MB expansion RAM module is installed, the free space to be increased is
the same as when a 256-MB expansion RAM module is installed.
<38 LOW IMGE QLTY>
Cause The printer cannot process the data in the Super Fine mode because it is
too complicated.
Remedy 1 The printer continues printing by pressing [Online]. However, the printer prints
with the resolution level of the data being lowered.
Remedy 2 Perform a soft reset in the RESET menu, set RESOLUTION (See p. 5-43) in the
QUALITY MENU options in the SETUP menu to FINE, and then print again.
Remedy 3 Perform a soft reset in the RESET menu, set GRADATION LEVEL (See p. 5-44)
in the QUALITY MENU options in the SETUP menu to HIGH 1, and then print
again.
<Auto Error Skip>
<Auto Error Skip>
<Auto Error Skip>
<Auto Error Skip>
Message List 7-39
7