Hdd Maintenance; Hdd All Erase - Canon Color imageRUNNER LBP5975 User Manual

SP.S-SIZE MODE2
CLEANING
5

HDD MAINTENANCE

■ HDD ALL ERASE

5-72 SETUP Menu Settings
-2 to 2; 0*
When printing narrow paper (Statement size etc.) continuously, the printer may
stop printing temporarily and cool down the fixing unit so that the print quality is
maintained. You can specify the waiting time before the print operation begins for
this case.
The smaller the setting value is, the more the printer gives priority to the image
quality when printing. However, the waiting time before the print operation begins
may be lengthened.
The greater the setting value is, the shorter the printer makes the waiting time
when printing. However, residual images of the previously printed text or images
may appear on both sides of the paper when wider paper is printed after the
continuous printing.
-
If you touch the transfer belt of the ITB unit, this may result in deterioration in print
quality. In this case, clean the transfer belt of the ITB unit.
NOTE
Cleaning takes approximately 180 seconds.
•
The cleaning process cannot be canceled. Please wait until it is completed.
•
OFF*, ON
Specifies whether to completely erase the printed or deleted data from the hard
disk. By erasing data completely, readout of the data by special software is
prevented.
If ON is specified, the printer performs the process for completely erasing the data
when deleting the data in the hard disk.
If OFF is specified, the printer does not perform the process for completely
erasing the data.