NOTE
If you want to print custom size paper of its long edges 11.69 in. (297.0 mm) or less
•
when TRAY PAPER SIZE in the FEEDER MENU options in the SETUP is set to
MIXED SIZES, specify the settings according to the printer driver you are using as
follows.
- When using UFR II Printer Driver: Load the paper in landscape orientation
- When not using UFR II Printer Driver: Load the paper in portrait orientation
To print paper with letterheads or logos, see "Paper Loading Orientation" (p. 3-78)
•
and load the paper in the proper orientation.
5
Align the paper guides with both sides of the stack.
IMPORTANT
Be sure to align the paper guides with the width of the paper. If the paper guides
•
are too loose or too tight, this may result in misfeeds or paper jams.
Next, specify the paper size for the multi-purpose tray (See p. 3-59).
Loading Paper in the Multi-purpose Tray
3
3-53