Canon Color imageRUNNER LBP5975 User Manual page 262

4
PROXY SETTINGS*
PROXY ...............................OFF*, ON
5
SERVER ADDRESS*
5
PORT NUMBER* ..............0 to 99999; 80*
5
SAME DOMAIN* ...............NO PROXY*, USE PROXY
5
PROXY AUTH.* .................OFF*, ON
5
USER NAME*
5
PASSWORD*
SNTP
OFF*, ON
RESPONSE
ON*, OFF
MAC ADDRESS SET
PERMIT RECEIVE .............OFF*, ON
2
PERMIT ADD.SET.* ..........PER.MAC ADD.1 to 50
*1 PROTOCOL is displayed only when IP MODE is set to AUTO.
*2 REJECT ADD.SET. and PERMIT ADD.SET. are displayed only when REJECT RX/PRT, PERMIT RX/
PRT, REJ SET/BROWSE, PMT SET/BROWSE, or PERMIT RECEIVE is set to ON.
*3 WSD BROWSING is displayed only when WSD PRINT is set to OFF.
*4 PROXY SETTINGS is not displayed depending on the printer you are using or availability of the
optional accessories.
*5 SERVER ADDRESS, PORT NUMBER, SAME DOMAIN, and PROXY AUTH. are displayed only when
PROXY is set to ON.
Specifies the TCP/IP setting for the print server equipped with this printer.
Item
Select the method for setting the IP address.
- When specifying the IP address using any one of DHCP,
IP MODE BOOTP, or RARP, select AUTO.
- When specifying the IP address to the printer directly, select
MANUAL.
If you have set IP MODE to AUTO, select which protocol you
want to use.
PROTOCOL
Set each of DHCP, BOOTP, and RARP to ON (use) or OFF (do
not use).
Specify the settings for IP ADDRESS, SUBNET MASK, and
GATEWAY ADDRESS.
IP SETTINGS
For the method for entering the addresses, see "Method for
entering addresses" below the table.
Setting
SETUP Menu Settings
5
5-57