Specifying a Gutter
■ When printing from Windows
Specify the following settings in the printer driver. For details on using the printer driver,
see Help of the printer driver.
1. Display the [Finishing] sheet in the printer driver.
2. Specify [Binding Location].
3. Click [Gutter] to specify the gutter width in the [Gutter Settings] dialog box.
■ When printing from Macintosh
Specify the settings in the printer driver. For details on using the printer driver, see Help of
3
the printer driver.
■ When printing from DOS or UNIX
When you are printing from DOS, UNIX, or other operating system on which you cannot
use the printer driver, perform the following procedure using the printer's control panel.
1
Settings
2
Utility
Settings
OK
3
Utility
Settings
OK
3-68
Printing with a Gutter
Press [Settings].
SETUP
CONTROL MENU
Select LAYOUT MENU using [
LAYOUT MENU
COPIES
Select BIND.LOCATION using [
BIND.LOCATION
=LONG EDGE
The setting value for BIND.LOCATION is displayed.
→
] and [ ], then press [OK].
→
] and [ ], then press [OK].
→
→