Do not hold the lock release lever (B) or shutter (C) of the toner cartridge as shown in the
•
figure. Be careful not to hold or touch areas that are not specified in this procedure. This
may result in damage to the cartridge.
Do not attempt to disassemble or modify the toner cartridge.
•
Condensation may form in and on a toner cartridge if it is brought into an environment
•
that exposes it to sudden changes in temperature and/or humidity. If you move the toner
cartridge to a location that is warmer or has higher humidity, leave the cartridge in the
new location for 2 hours or longer without opening the protective pack to allow it to adjust
6
to the new temperature.
6-14
Replacing Toner Cartridges
(B)
(C)