Switching Between Automatic 2-Sided Printing And 1-Sided Printing - Canon Color imageRUNNER LBP5975 User Manual

During automatic 2-sided printing, do not touch the paper until it is output to the output
•
tray completely. In automatic 2-sided printing, the paper is partially output once after
printed on its surface and is fed again to be printed on its reverse side.
NOTE
Depending on the capacity of the RAM in the printer, the print quality may deteriorate, or
•
the printer may not be able to print, displaying <SPL MEM.FULL> when performing
automatic 2-sided printing on documents that make heavy use of lines or contain
complicated diagrams, charts, or graphs. In this case, take the following measures.
- Set GRADATION LEVEL to HIGH 1, then print again.
- Install an expansion RAM module. (See Getting Started Guide)
On automatic 2-sided printing, the reverse side of the paper is printed first, therefore the
•
paper should be loaded in the opposite orientation to that for 1-sided printing. If printing
on such paper with letterheads, in which faces and directional orientations are specified,
3
see "Paper Loading Orientation" (p. 3-78) and load the paper in the proper orientation.
Switching Between Automatic 2-sided Printing and
1-sided Printing
Perform automatic 2-sided printing using the following procedure.
■ When printing from Windows
When performing automatic 2-sided printing, set [Print Style] in the [Finishing] sheet in the
printer driver to [2-sided Printing]. For details on using the printer driver, see Help of the
printer driver.
■ When printing from Macintosh
When performing automatic 2-sided printing, specify the settings in the printer driver. For
details on using the printer driver, see Help of the printer driver.
■ When printing from DOS or UNIX
When you are printing from DOS, UNIX, or other operating system on which you cannot
use the printer driver, specify the settings using the control panel. Switch between
automatic 2-sided printing and 1-sided printing with the printer's control panel using the
following procedure.
Settings 1
3-64 2-sided Printing
Press [Settings].
SETUP
CONTROL MENU
→