Figure 21. Unlatching The Heatsink Retaining Clip (Shown From Power Supply Side); Figure 22. Raising The Locking Bar On The Processor Socket - HP Carrier-grade cc2300 Product Manual

Removing a Processor
1. Observe the safety and ESD precautions at the beginning of this chapter and the additional
cautions given here.
2. Detach the heatsink-retaining clip from the processor socket using a screwdriver or other tool
as shown in Figure 21.

Figure 21. Unlatching the Heatsink Retaining Clip (Shown from Power Supply Side)

3. Remove the heatsink from the processor.
4. Raise the locking bar on the socket as shown in Figure 22.

Figure 22. Raising the Locking Bar on the Processor Socket

5. Remove the processor from the socket.
6. If you removed the processor from the secondary socket and are not replacing it, you must
install a terminator in its place.
78
OM12827
OM11788
cc2300 Carrier Grade Server Product Guide