HP Carrier-grade cc2300 Product Manual page 84

5. Power cable should plug into carrier opening (A) and be positioned as shown. The end of the
Flex cable should route up through the slot in carrier (B) if pull-tab is present.
6. Place EMI covers on top and bottom of drive (Top shown).
7. Install drive assembly down into the top of the unit and then forward through the opening in the
front of the unit as shown.
CAUTION
Carefully install the assembly to avoid deforming the EMI top cover spring
fingers.
8. If tabs are present, position the carrier to engage between the chassis tabs (A). Note: Latest
style carriers do not engage tabs.
9. Plug power cable from power supply to the cable power plug on the carrier (B).
84 cc2300 Carrier Grade Server Product Guide