HP Carrier-grade cc2300 Product Manual page 109

Table 21. POST Code - Port 80h Codes (continued)
Post
Code Diagnostic LED Decoder
MSB
12h Off Off
12h Off Off
27h Off G
F4h R A
F6h R A
15h Off G
15h Off G
15h Off G
26h Off G
28h G Off
29h G Off
2Ah G Off
2Bh G Off
2Dh G G
2Dh G G
30h Off Off
30h Off Off
2Eh R R
37h Off G
37h Off G
37h Off G
38h G Off
34h Off G
39h G Off
3Ah G Off
40h Off R
cc2300 Carrier Grade Server Product Guide
Description
LSB
Note: G=Green, R=Red, A=Amber
G R Initializing APP CMOS RAM for appliance servers only.
G R Check point after CMOS initialized.
A G Validate date and time in RTC.
R R Load micro code to all CPUs.
A R Scan SMBIOS GPNV areas.
Off A 8254 timer test on channel 2.
Off A Enable 8042.
Off A Keyboard reset.
A Off Initialize LCD, if supported.
Set Video Mode: initialization before setting the video mode is
R Off complete. Configuring the monochrome mode and color mode
settings next.
R G Debugger hook.
Init PCI devices and motherboard devices. Pass control to video
A Off
BIOS Start serial console redirection.
A G Platform hook.
Initialize AMI display manager module. Initialize support code for
R G
headless system if no video controller is detected.
R G Scan flash for logos and Initialize logo data areas.
R R Detect PS/2 mouse.
R R Hook after c000 ROM control.
A Off Set up video parameters in BIOS data area.
Activate ADM: the display mode is set. Displaying the power-on
A A
message next.
A A Initialize language module. Display splash logo.
A A Display Sign-On Message BIOS ID and processor information.
Detect USB mouse: initializing the bus input, and general devices
R R
next, if present.
R R Reset IDE controllers.
R A Displaying bus initialization error messages.
Display Setup Message the new cursor position has been read and
A R
saved. Displaying the hit setup message next.
Off Off Ensure timer keyboard interrupts are on.
continued
109