Internal Chassis Layout; Figure 13. Internal Chassis Layout - HP Carrier-grade cc2300 Product Manual

Internal Chassis Layout

The server board contains connectors for installing up to two Pentium III processors utilizing the
FCPGA sockets. The server board has six DIMM slots and supports up to 6 GB error checking and
correcting (ECC) SDRAM memory. The server board also contains two PCI slots (implemented
via riser cards), input/output (I/O) ports and various controllers.
A Server board
B 5 V PCI add-in card riser
C 3.3 V PCI add-in card riser
D Fan module
E SCSI hard disk drive (right)
F USB connectors
The server board is mounted horizontally toward the rear of the chassis behind the system fan array.
Up to two 1.0-inch SCSI Ultra160 hard drives can be mounted in the chassis.
Underneath the left side hard drive is located the peripheral bay. The server is supplied with a
slim-line (1/2-inch) CD-ROM drive. The front panel is located below the right side hard drive and
provides user interface for system management.
cc2300 Carrier Grade Server Product Guide
G Serial port
H Front panel board (located beneath right HDD)
I Peripheral drive bay
J SCSI hard disk drive (left)
K Power board (located beneath cables)
L Power supply

Figure 13. Internal Chassis Layout

67