Environmental Specifications; Table 2. Environmental Specifications - HP Carrier-grade cc2300 Product Manual

Environmental Specifications

The cc2300 Carrier Grade Server meets environmental specifications as indicated in Table 2. All
testing was performed per procedures defined in Bellcore GR-63-CORE NEBS Physical Protection,
Bellcore GR-3580 NEBS Criteria Levels, Bellcore GR-1089-CORE EMC and Electrical Safety –
Generic Criteria for Network Telecommunications Equipment.
Table 2. Environmental Specifications
Environment
Temperature operating
Temperature non-operating
Altitude
Humidity non-operating
Vibration operating
Vibration non-operating
Shock operating
Shock non-operating
Safety
Emissions
Immunity
Electrostatic discharge
(ESD)
Acoustic
Power
Maximum current at 100 VAC
Maximum current at 120 VAC
Maximum current at 230 VAC
Does the input current differ at 50 to 60Hz (if yes, input the highest
value)
Maximum peak inrush current
Time to decay to 25% of maximum peak
Time duration to return to nominal
Total harmonic distortion (voltage)
Power factor
14
Specification
5 °C to 40 °C (41 °F to 104 °F)
-40 °C to 70 °C (-104 °F to 158 °F)
0 to 3,062 m (0 to 13,000 ft)
95%, non-condensing at temperatures of 23 °C (73 °F) to 40 °C (104 °F)
Swept sine survey at an acceleration amplitude of 0.1 g from 5 to 100 Hz
and back to 5 Hz at a rate of 0.1 octave/minute, 90 minutes per axis on all
three axes as per Bellcore GR-63-CORE standards.
Swept sine survey at an acceleration amplitude of 0.5 g from 5 to 50 Hz at a
rate of 0.1 octaves/minute, and an acceleration amplitude of 3.0g from 50 to
500 Hz at a rate of 0.25 octaves/minute, on all three axes as per Bellcore
GR-63-CORE standard.
2.2 Grms, 10 minutes per axis on all three axes.
Half-sine 2 G, 11 ms pulse, 100 pulses in each direction, on each of the
three axes.
Trapezoidal, 25 G, 170-inch/sec delta V, three drops in each direction, on
each of the three axes.
UL 1950, CSA 950, IEC 950, TUV/GS EN60950.
Certified to FCC Class A; tested to CISPR 22 Class A, EN 55022 Class A,
VCCI Class A ITE, AS/NZS 3548 Class A.
Verified to comply with EN 50082-1.
Tested to ESD levels up to 15 kilovolts (kV) air discharge and up to
8 kV contact discharge without physical damage.
Sound pressure: < 55 dBA at ambient temperatures < 28 °C measured at
bystander positions in operating mode.
1.6 Amps
1.3 Amps
0.7 Amps
No
21.6 Amps
<0.02 Seconds
1 Seconds
0.11%
0.86#
cc2300 Carrier Grade Server Product Guide