4 Upgrading the Hardware
Tools and Supplies Needed
Procedures in this section require the following tools and supplies:
•
Jumper-removal tool or needle-nosed pliers
•
Small flat-bladed screwdriver
•
†
Phillips
(cross-head) screwdriver (#2)
•
Pen or pencil
•
Anti-static wrist strap and conductive foam pad (recommended)
Equipment log: as you integrate new parts into the system, add information about them to your
equipment log (Appendix B). Record the model and serial number of the system, all installed
options, and any other pertinent information specific to the system.
cc2300 Carrier Grade Server Product Guide
Figure 11. Tools and Supplies Needed
63