Removing And Installing Memory; Figure 17. Installing Dimms - HP Carrier-grade cc2300 Product Manual

Removing and Installing Memory

The server board supports only PC133-compliant SDRAM. DIMMS must be the same speed.
Install from 256 MB to 6 GB of registered memory.
DIMMs must be installed in pairs in the following order: 1A-1B, 2A-2B, and 3A-3B as shown in
Figure 17. The DIMM sockets are further identified on the board's silkscreen.
It is recommended that HP tested memory is used when adding memory capacity to the server.
cc2300 Carrier Grade Server Product Guide
1A 3A 2B
2A 1B 3B

Figure 17. Installing DIMMs

OM11790
73