Figure 18. Raising The Locking Bar And Removing The Terminator - HP Carrier-grade cc2300 Product Manual

Adding a Processor
If you are adding a second processor to your system, you must first remove the terminator from the
secondary processor socket. The second processor must be compatible with the first processor
(within one stepping, same voltage, and same speed.).
1. Observe the safety and ESD precautions at the beginning of this chapter.
2. Remove the top cover.
3. Remove any PCI cards that may obscure the processors.
4. Raise the locking bar on the processor socket and remove the terminator as shown in Figure 18.

Figure 18. Raising the Locking Bar and Removing the Terminator

cc2300 Carrier Grade Server Product Guide
OM11814
75