Figure 20. Aligning The Heatsink And Installing The Heatsink Retaining Clip - HP Carrier-grade cc2300 Product Manual

6. Apply the powerstrate (heat dissipation) strip to the top of the processor.
7. Align the processor and heatsink (D in Figure 20) so that the raised areas can make full contact
when assembled (the blades of the heatsink should point toward the fans).
8. Place the heatsink (B in Figure 20) on top of the powerstrate and processor (A in Figure 20).
9. Hook the heatsink retention clip (C in Figure 20) to one end of the processor socket. Using a
screwdriver or other tool, attach the other side of the clip to the other side of the processor
socket.

Figure 20. Aligning the Heatsink and Installing the Heatsink Retaining Clip

cc2300 Carrier Grade Server Product Guide
C
A
B
D
OM12826
77