Peripheral Bay; Scsi Hard Drive Bay 1 And 2; Table 12. Ac Input Rating; Table 13. 250 W Load Ratings - HP Carrier-grade cc2300 Product Manual

AC Input Voltage Specification
The power supply will operate within all specified limits over the input voltage ranges outlined in
Table 12. Harmonic distortion of up to 10% THD will not cause the power supply to go out of
specified limits.
Table 12. AC Input Rating
Parameter
Voltage (110)
Voltage (220)
Frequency
DC Output Current Specifications
The combined output power of all outputs should not exceed 250 W. Each output has a maximum
and minimum current rating shown in Table 13. The power supply meets both static and dynamic
voltage regulation requirements for the minimum dynamic loading conditions. The power supply
meets only the static load voltage regulation requirements for the minimum static load conditions.
Table 13. 250 W Load Ratings
PEAK (10sec)
MAX
MIN DYNAMIC
MIN STATIC
NOTE
The maximum combined power of the 3.3 V and 5 V outputs is 150 W.

Peripheral Bay

The peripheral bay provides support for one removable media device, which can be one of the
following devices.
•
½-inch (slimline) CD-ROM drive, or
•
½-inch (slimline) floppy drive (optional)

SCSI Hard Drive Bay 1 and 2

The hard drive tray supports two 3.5-inch x 1.0-inch Ultra160 SCSI technology hard disk drives
(non-SCA). The hard drive tray accepts 15K RPM (and below) hard drives that consume up to
18 Watts of power.
cc2300 Carrier Grade Server Product Guide
MIN RATED
90 V 100-127 V
rms rms
180 V 200-240 V
rms rms
47 Hz
+3.3 V +5 V
20A 20A
2.0A 2.0A
1A 1A
Max Input Current
MAX (250 W Version)
140 V 6.7 A
rms rms
264 V
rms
63 Hz
+12 V -12 V
30A
25A 0.5A
1.5A 0A
0A 0A
5 VSB
1.5A
0A
0A
35