Removing the Bezel and Top Cover
CAUTION
For proper cooling and airflow, do not operate the server with the cover
removed. Always reinstall the cover before turning the server on.
To remove the top cover, follow this procedure:
1. Loosen the two captive screws on the front panel and remove the bezel (A in Figure 12).
2. Remove the two screws securing the front of the top cover (B in Figure 12).
3. Lift the front edge of the top cover (C in Figure 12) and push the cover toward the back of the
server (D in Figure 12) until free of the rear lip.
4. Lift the top cover up to remove.
66
Figure 12. Removing the Top Cover and Bezel Assembly
cc2300 Carrier Grade Server Product Guide