Qinq Ethernet-Type Service-Tag - HP 6125XLG Command Reference Manual

Default
The CVLAN TPID is 0x8100.
Views
System view
Predefined user roles
network-admin
Parameters
hex-value: Sets a hexadecimal TPID value in the range of 0x0001 to 0xFFFF, excluding the common
protocol type values listed in
Table 35 Common protocol type values
Protocol type
ARP
PUP
RARP
IP
IPv6
PPPoE
MPLS
IPX/SPX
IS-IS
LACP
802.1X
LLDP
802.1ag
Cluster
Reserved
Usage guidelines
A QinQ-enabled port uses the CLAN TPID to match incoming tagged frames. An incoming frame is
handled as an untagged frame if its TPID is different from the CVLAN TPID.
Examples
# Set the TPID value in CVLAN tags to 0x8200.
<Sysname> system-view
[Sysname] qinq ethernet-type customer-tag 8200

qinq ethernet-type service-tag

Use qinq ethernet-type service-tag to configure the SVLAN TPID.
Use undo qinq ethernet-type service-tag to restore the default SVLAN TPID.
Table 35.
Value
0x0806
0x0200
0x8035
0x0800
0x86DD
0x8863/0x8864
0x8847/0x8848
0x8137
0x8000
0x8809
0x888E
0x88CC
0x8902
0x88A7
0xFFFD/0xFFFE/0xFFFF
165