Using Fortygige - HP 6125XLG Command Reference Manual

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] unicast-suppression kbps 10000
Related commands
broadcast-suppression
•
multicast-suppression
•

using fortygige

Use using fortygige to combine four 10-GE interfaces that are split from a 40-GE interface into a 40-GE
interface.
Use undo using fortygige to cancel the configuration.
Syntax
using fortygige
undo using fortygige
Default
The 10-GE interfaces that are split from a 40-GE interface are used as single interfaces, and they will not
be automatically combined.
Views
Split 10-GE interface view
Predefined user roles
network-admin
Usage guidelines
If you need higher bandwidth, you can combine four 10-GE interfaces that are split from a 40-GE
interface into a 40-GE interface. To make this command take effect on the four split 10-GE interfaces,
execute this command on only one of the split 10-GE interfaces.
After the configuration, the system prompts you to reboot your device. You must reboot the device to see
the combined 40-GE interface.
Examples
# Combine 10-GE interfaces Ten-GigabitEthernet 1/1/1:1 through Ten-GigabitEthernet 1/1/1:4 into a
40-GE interface.
<System> system-view
[System] interface ten-gigabitethernet1/1/1:1
[System-Ten-GigabitEthernet1/1/1:1] using fortygige
The interfaces Ten-GigabitEthernet1/1/1:1 through Ten-GigabitEthernet1/1/1:4 will be
deleted. Continue? [Y/N]:y
Reboot device to make the configuration take effect.
Related commands
using tengige
33