Stp Tc-Protection - HP 6125XLG Command Reference Manual

undo stp root-protection
Default
The root guard function is disabled.
Views
Ethernet interface view, aggregate interface view
Predefined user roles
network-admin
Usage guidelines
On a port, the loop guard function, the root guard function, and the edge port setting are mutually
exclusive, and the one that is configured first takes effect.
When the setting is configured in Ethernet interface view, it takes effect on only that interface.
When the setting is configured in aggregate interface view, it takes effect on only the aggregate
interface.
When the setting is configured on a member port in an aggregation group, it takes effect only after the
port leaves the aggregation group.
Examples
# Enable the root guard function for FortyGigE 1/1/1.
<Sysname> system-view
[Sysname] interface fortygige 1/1/1
[Sysname-FortyGigE1/1/1] stp root-protection
Related commands
stp edged-port
•
• stp loop-protection

stp tc-protection

Use stp tc-protection to enable the TC-BPDU attack guard function for the device.
Use undo stp tc-protection to disable the TC-BPDU attack guard function for the device.
Syntax
stp tc-protection
undo stp tc-protection
Default
The TC-BPDU attack guard function is enabled.
Views
System view
Predefined user roles
network-admin
131