Display Counters - HP 6125XLG Command Reference Manual

Default
The description
Ten-GigabitEthernet1/1/5 Interface).
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
text: Specifies the interface description, a case-sensitive string of 1 to 80 characters.
Usage guidelines
When you use a network management system (for example, IMC) to manage devices, to guarantee the
normal operation of the network management system, make sure the text argument is of no more than 64
characters.
Examples
# Change the description of interface Ten-GigabitEthernet 1/1/5 to lanswitch-interface.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] description lanswitch-interface

display counters

Use display counters to display interface traffic statistics.
Syntax
display counters { inbound | outbound } interface [ interface-type [ interface-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
inbound: Displays inbound traffic statistics.
outbound: Displays outbound traffic statistics.
interface-type: Specifies an interface type.
interface-number: Specifies an interface number.
Usage guidelines
This command displays traffic statistics within a statistics polling interval specified by the flow-interval
command.
To clear the Ethernet interface traffic statistics, use the reset counters interface command. For more
information, see
of an interface
"reset counters interface."
is the interface name
3
plus Interface (for example,