Storm-Constrain Enable Log; Storm-Constrain Enable Trap - HP 6125XLG Command Reference Manual

forward the traffic. To bring up the interface, use the undo shutdown command or disable the storm
control function.
Examples
# Configure Ten-GigabitEthernet 1/1/5 to block the traffic detected crossing the upper storm control
threshold.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] storm-constrain control block
Related commands
storm-constrain
•
storm-constrain control
•

storm-constrain enable log

Use storm-constrain enable log to enable an Ethernet interface to log storm control threshold events.
Use undo storm-constrain enable log to disable log sending.
Syntax
storm-constrain enable log
undo storm-constrain enable log
Default
An interface generates logs when monitored traffic exceeds the upper threshold or falls below the lower
threshold.
Views
Ethernet interface view
Predefined user roles
network-admin
Examples
# Enable Ten-GigabitEthernet 1/1/5 to generate logs when it detects storm control threshold events.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] storm-constrain enable log

storm-constrain enable trap

Use storm-constrain enable trap to enable an Ethernet interface to send storm control threshold event
traps.
Use undo storm-constrain enable trap to disable trap sending.
Syntax
storm-constrain enable trap
undo storm-constrain enable trap
30