HP 6125XLG Command Reference Manual page 195

Transmit interval
Hold multiplier
Reinit delay
Transmit delay
Trap interval
Fast start times
LLDP status information of Port 1 [FortyGigE1/1/1]:
Port status of LLDP
Admin status
Trap flag
MED trap flag
Polling interval
Number of LLDP neighbors
Number of MED neighbors
Number of CDP neighbors
Number of sent optional TLV
Number of received unknown TLV : 0
Table 40 Command output
Field
Global status of LLDP
LLDP neighbor information last
changed time
Transmit interval
Hold multiplier
Reinit delay
Transmit delay
Trap interval
Fast start times
Port 1
Port status of LLDP
Admin status
Trap Flag
Polling interval
Number of neighbors
Number of MED neighbors
Number of CDP neighbors
: 30s
: 4
: 2s
: 2s
: 5s
: 3
: Enable
: Tx_Rx
: No
: No
: 0s
: 0
: 0
: 0
: 23
Description
Indicates whether LLDP is globally enabled.
Time when the neighbor information was last updated.
LLDPDU transmit interval.
TTL multiplier.
LLDP re-initialization delay.
LLDPDU transmit delay.
Trap transmit interval.
Number of LLDPDUs sent each time fast LLDPDU transmission is
triggered.
LLDP status of port 1.
Indicates whether LLDP is enabled on the port.
LLDP mode of the port:
•
TxRx—The port can send and receive LLDPDUs.
•
Rx_Only—The port can only receive LLDPDUs.
•
Tx_Only—The port can only send LLDPDUs.
•
Disable—The port cannot send or receive LLDPDUs.
Indicates whether trapping is enabled.
LLDP polling interval, which is 0 when LLDP polling is disabled.
Number of LLDP neighbors connecting to the port.
Number of MED neighbors connecting to the port.
Number of CDP neighbors connecting to the port.
188