Display Vlan - HP 6125XLG Command Reference Manual

Field
Protocol
Main IP
Description

display vlan

Use display vlan to display VLAN information.
Syntax
display vlan [ vlan-id1 [ to vlan-id2 ] | all | dynamic | reserved | static ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan-id1: Displays information about a VLAN specified by its VLAN ID in the range of 1 to 4094.
vlan-id1 to vlan-id2: Displays information about VLANs that are specified by a VLAN ID range. The
vlan-id1 and vlan-id2 arguments specify VLAN IDs in the range of 1 to 4094. The vlan-id1 argument
cannot be greater than the vlan-id2 argument.
all: Displays all VLAN information except for the reserved VLANs.
dynamic: Displays the number of dynamic VLANs and the ID for each dynamic VLAN. The dynamic
VLANs are distributed by a RADIUS server.
reserved: Displays information about the reserved VLANs. Protocol modules determine which VLANs are
reserved VLANs according to function implementation, and reserved VLANs serve protocol modules.
You cannot configure reserved VLANs.
static: Displays the number of static VLANs and the ID for each static VLAN. The static VLANs are
manually created.
Examples
# Display VLAN 2 information.
<Sysname> display vlan 2
VLAN ID: 2
VLAN type: Static
Route interface: Not configured
Description: VLAN 0002
Name: VLAN 0002
Tagged ports:
Untagged ports:
Description
Protocol connection state of the interface:
•
•
•
Main IP address of the interface.
Description of the interface.
None
UP.
DOWN.
UP(s).
148