Reset Counters Interface - HP 6125XLG Command Reference Manual

Default
An Ethernet interface does not belong to any aggregation group.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
number: Specifies the number of the aggregate interface that corresponds to an aggregation group. The
value range for the number argument is 1 to 1024.
Usage guidelines
An Ethernet interface can belong to only one aggregation group.
Examples
# Assign Ethernet interface Ten-GigabitEthernet 1/1/5 to aggregation group 1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] port link-aggregation group 1

reset counters interface

Use reset counters interface to clear the statistics for the specified aggregate interface or interfaces.
Syntax
reset counters interface [ bridge-aggregation [ interface-number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
bridge-aggregation: Clears statistics for aggregate interfaces.
interface-number: Specifies an aggregate interface number. If you do not specify this argument, this
command clears statistics for all aggregate interfaces.
Usage guidelines
Before collecting statistics for an aggregate interface within a specific period, clear its existing statistics.
If no keyword or argument is specified, the command clears the statistics of all interfaces in the system.
If only the bridge-aggregation keyword is specified, the command clears the statistics for all aggregate
interfaces.
If the bridge-aggregation interface-number option is specified, the command clears the statistics for the
specified aggregate interface.
The bridge-aggregation keyword becomes available only after you create aggregate interfaces on the
device.
88